Long-Term Evaluation of a Ternary Mixture of Molten Salts in Solar Thermal Storage Systems: Impact on Thermophysical Properties and Corrosion

Abstract

Solar thermal plants typically undergo trough operational cycles spanning between 20 and 25 years, highlighting the critical need for accurate assessments of long-term component evolution. Among these components, the heat storage media (molten salt) is crucial in plant design, as it significantly influences both the thermophysical properties of the working fluid and the corrosion of the steel components in thermal storage systems. Our research focused on evaluating the long-term effects of operating a low-melting-point ternary mixture consisting of 30 wt% LiNO3, 57 wt% KNO3, and 13 wt% NaNO3. The ternary mixture exhibited a melting point of 129 degrees C and thermal stability above 550 degrees C. Over 15,000 h, the heat capacity decreased from 1.794 to 1.409 J/g degrees C. Additionally, saline components such as CaCO3 and MgCO3, as well as lithium oxides (LiO and LiO2), were detected due to the separation of the ternary mixture. A 30,000 h exposure resulted in the formation of Fe2O3 and the presence of Cl, indicating prolonged interaction with the marine environment. This investigation highlights the necessity of analyzing properties under actual operating conditions to accurately predict the lifespan and select the appropriate materials for molten salt-based thermal storage systems.