Wenzel A., Vera S., Guindos P. (2024)

Energy and structural optimization of mid-rise light-frame timber buildings for different climates and seismic zones in Chile

European Journal of Wood and Wood Products 82 4 967-982

Adema A., Chacon M., Santa Maria H., Opazo-Vega A., Casanova E., Guindos P. (2024)

Flexural performance of full-scale two-span Nail-Laminated Timber Concrete composite slabs

Construction and Building Materials 432

Chacon M., Jara-Cisterna A., Benedetti F., Veliz F., Guindos P. (2024)

In-plane testing and hysteretic modeling of steel-spline cross-laminated timber diaphragm connection with self-tapping screws

Wood Material Science & Engineering

Basaure-Fuentes J., Guindos P., Araya-Letelier G. (2024)

Micro-meso characterization of prefabricated concrete-CLT adhesive joints

Case Studies in Construction Materials 21

Carrero T., Montano J., Perez L., Doudak G., Santa Maria H., Chacon M., Guindos P. (2024)

New enhanced hybrid glulam-framed OSB wall for tall timber buildings

Structures 70

Chacon M., Guindos P. (2024)

P2PE: A finite element formulation for panel-to-panel cross-laminated timber connections

COMPUTERS & STRUCTURES 300

Valdivieso D., Goldwyn B., Liel A., Javernick-Will A., Lopez-garcia D., Guindos P. (2024)

Potential for mitigating hurricane wind impact on informally-constructed homes in Puerto Rico under current and future climate scenarios

International Journal of Disaster Risk Reduction 110

Quizanga D., Almazan J., Valdivieso D., Lopez-garcia D., Guindos P. (2024)

Shaking table test of a timber building equipped with a novel cost-effective, impact-resilient seismic isolation system

Journal of Building Engineering 82

Veliz F., Chacon M., Lagos J., Berwart S., Lopez N., Guindos P. (2024)

Structural performance of strong timber diaphragms: High-capacity light-timber frames and cross-laminated timber

Structures 63

Valdivieso D., Almazan J., Lopez-garcia D., Montano J., Liel A., Guindos P. (2024)

System effects in T-shaped timber shear walls: Effects of transverse walls, diaphragms, and axial loading

EARTHQUAKE ENGINEERING & STRUCTURAL DYNAMICS 53 8 2532-2554

Joseph H., Pachiappan T., Avudaiappan S., Maureira-Carsalade N., Roco-Videla A., Guindos P., Parra P. (2023)

A Comprehensive Review on Recycling of Construction Demolition Waste in Concrete

Sustainability 15 6

(2023)

A New Multi-Spring Element To Simulate Clt Connections Under Combined Loadings.

World Conference on Timber Engineering WCTE 2023

Chacon M., Guindos P. (2023)

ASPID: An asymmetric pinching damaged hysteresis model for timber structures

Construction and Building Materials 404

(2023)

Comparison of four phenomenological-based hysteretic timber models.

XIII Congreso Chileno de Sismología e Ingeniería Sísmica ACHISINA 2023

Fernando D., Kowalczyk M., Guindos P., Auer M., Daniel G. (2023)

Electron tomography unravels new insights into fiber cell wall nanostructure; exploring 3D macromolecular biopolymeric nano-architecture of spruce fiber secondary walls

Scientific Reports 13 1

(2023)

Estudio experimental en mesa vibradora de una estructura de madera de 3 pisos de entramado ligero con aisladores sísmicos friccionales resilientes a impacto

XIII Congreso Chileno de Sismología e Ingeniería Sísmica ACHISINA

Divyah N., Prakash R., Srividhya S., Avudaiappan S., Guindos P., Carsalade N., Arunachalam K., Farsangi E., Roco-Videla A. (2023)

Experimental and Numerical Investigations of Laced Built-Up Lightweight Concrete Encased Columns Subjected to Cyclic Axial Load

Buildings 13 6

Valdivieso D., Guindos P., Montan J., Lopez-garcia D. (2023)

Experimental investigation of multi-layered strong wood-frame shear walls with nonstructural Type X gypsum wallboard layers under cyclic load

ENGINEERING STRUCTURES 282

Avudaiappan S., Moreno P., R Luis F., Chavez-Delgado M., Arunachalam K., Guindos P., Marzialetti B., Parra P., Flores E., Arrey J. (2023)

Experimental investigation on the physical, microstructural, and mechanical properties of hemp limecrete

Scientific Reports 13 1

(2023)

Full-Scale Lateral Testing And Modelling Of Industrialized Timber Diaphragms Including Only Framing And Non-Structural Sheathing

World Conference on Timber Engineering WCTE 2023

Wettling C., Mourgues C., Guindos P. (2023)

IDM for the Conceptual Evaluation Process of Industrialized Timber Projects

Advances in Civil Engineering 2023

(2023)

Modelación de Muros de Madera en Entramado Ligero mediante Elementos Frame y Link en Software ETABS para Edificios de Mediana Altura

XIII Congreso Chileno de Sismología e Ingeniería Sísmica ACHISINA 2023

(2023)

Monitoreo Sísmico y Salud Estructural de Torre Experimental Peñuelas Mediante el uso de RaspberryShake

XIII Congreso Chileno de Sismología e Ingeniería Sísmica ACHISINA 2023

(2023)

Monotonic and cyclic characterization of multilayer sheathing-to-wood frame connection.

12th US National Conference on Earthquake Engineering

Joseph H., Pachiappan T., Avudaiappan S., Guindos P. (2023)

Prediction of the mechanical properties of concrete incorporating simultaneous utilization of fine and coarse recycled aggregate

Revista de la Construccion 22 1 178-191

(2023)

Presentación del capítulo de madera para el código modelo sísmico para Latinoamérica y el Caribe.

6ª jornada de la Comisión Permanente del código modelo sísmico para Latinoamérica y el Caribe

Veliz F., Estrella X., Lagos J., Guindos P. (2023)

Testing and nonlinear modelling of industrialized light-frame wooden diaphragms including optimized nailing and nonstructural sheathing

ENGINEERING STRUCTURES 297

(2023)

Testing Of Strong Multi-Layered Wood Frame Shear Walls With Non-Structural Layers

World Conference on Timber Engineering WCTE 2023

(2023)

Testing The Influence Of 3d Coupling Effects On The Lateral Response Of Non-Planar T-Shape Wood Frame Shear Walls

World Conference on Timber Engineering WCTE 2023

Maturana J., Guindos P., Lagos J., Arroyave C., Echeverria F., Correa E. (2023)

Two-step hot isostatic pressing densification achieved non-porous fully-densified wood with enhanced physical and mechanical properties

Scientific Reports 13 1

Berwart S., Estrella X., Montaño J., Santa-María H., Almazán J.L., Guindos P. (2022)

A simplified approach to assess the technical prefeasibility of multistory wood-frame buildings in high seismic zones

Engineering Structures 257

Berwart S., Estrella X., Montaño J., Santa María H., Almazán J.L., Guindos P. (2022). A Simplified Method to Assess the Technical Feasibility of Multistory Wood-Frame Buildings with Shear Walls, 12th National Conference on Earthquake Engineering, June 27-July 1, Salt Lake City, Utah, USA. (2022)

A Simplified Method to Assess the Technical Feasibility of Multistory Wood-Frame Buildings with Shear Walls

Adema A., Santa María H., Guindos P. (2022)

Analysis and design of timber concrete floors with boundary conditions different than simply supported

Engineering Structures 254

Raju S., Rathinam J., Dharmar B., Rekha S., Avudaiappan S., Amran M., Iurevna Usanova K., Fediuk R., Guindos P., Velayutham Ramamoorthy R. (2022)

Cyclically Loaded Copper Slag Admixed Reinforced Concrete Beams with Cement Partially Replaced with Fly Ash

Materials 15 9 3101

Araya R., Guillaumet A., Do Valle A., Duque M., Gonzalez G., Cabrero J.M., De León E., Castro F., Gutierrez C., Negrao J., Moya L., Guindos P. (2022)

Development of Sustainable Timber Construction in Ibero-America: State of the Art in the Region and Identification of Current International Gaps in the Construction Industry

Sustainability 14 3 1170

Chakrawarthi V., Jesuarulraj L., Avudaiappan S., Rajendren D., Amran M., Guindos P., Roy K., Fediuk R., Ivanovich-Vatin N. (2022)

Effect of Design Parameters on the Flexural Strength of Reinforced Concrete Sandwich Beams

Crystals 12 8 1021

Prakash R., Divyah N., Srividhya S., Avudaiappan S., Amran M., Naidu-Raman S., Guindos P., Ivanovich V N., Fediuk R. (2022)

Effect of Steel Fiber on the Strength and Flexural Characteristics of Coconut Shell Concrete Partially Blended with Fly Ash

Materials 15 12 4272

Arularasi V., Pachiappan T., Avudaiappan S., Naidu-Raman S., Guindos P., Amran M., Fediuk R., Ivanovich-Vatin N. (2022)

Effects of Admixtures on Energy Consumption in the Process of Ready-Mixed Concrete Mixing

Materials 15 12 4143

Wenzel A., Vera S., Guindos P. (2022)

Integration of energy and seismic-structural design variables through the optimization of a multi-story residential light-frame timber building with different seismic lateral connectors and building stories

Journal of Building Engineering 57 104831

Valdivieso D, Guindos P, Lopez-Garcia D (2022): Monotonic and cyclic characterization of multilayer sheathing-to-wood frame connection. 12th US National Conference on Earthquake Engineering, Salt Lake City, USA, electronic paper 10423. (2022)

Monotonic and cyclic characterization of multilayer sheathing-to-wood frame connection

12th US National Conference on Earthquake Engineering

Bernard V., Renuka S., Avudaiappan S., Umarani C., Amran M., Guindos P., Fediuk R., Ivanovich Vatin N. (2022)

Performance Investigation of the Incorporation of Ground Granulated Blast Furnace Slag with Fly Ash in Autoclaved Aerated Concrete

Crystals 12 8 1024

Karmegam A., Avudaiappan S., Amran M., Guindos P., Ivanovich-Vatin N., Fediuk R. (2022)

Retrofitting RC beams using high-early strength alkali-activated concrete

Case Studies in Construction Materials 17 E01194

Alarcón M., Soto P., Hernández F., Guindos P. (2022)

Structural health monitoring of South America's first 6-Story experimental light-frame timber-building by using a low-cost RaspberryShake seismic instrumentation.

Engineering Structures 275 Part B 115278

(2021)

Cyclic Behaviour Of Wooden Connections With Other Materials.

WCTE2021, World conference on timber engineering

Estrella X., Malek S., Almazán J.L., Guindos P., Santa María H. (2021)

Experimental study of the effects of continuous rod hold-down anchors on the cyclic response of wood frame shear walls

Engineering Structures 230

Araya R., Montaño J., Guindos P. (2021)

Experimental Test of The Gap Reinforced Fastened Connection (GRFC): A highly stiff and ductile reinforced connection concept with reduced pinching for timber structures

Engineering Structures 251 113584

(2021)

Framework Invention Of Hybrid Walls With Cross Laminated Timber For Buildings In Chile

WCTE2021, World conference on timber engineering

(2021)

Mid-Rise Timber Buildings In Chile: A Rational Quantification Of The Seismic Design Factors

WCTE2021, World conference on timber engineering

(2021)

Multicriteria design optimization of multi-storey light-frame timber buildings considering structural and thermal energy performance

WCTE2021, World conference on timber engineering

(2021)

Pinching-reduced hold-down type connection for CLT shear wall.

WCTE2021, World conference on timber engineering

Carrero T., Montaño J., Berwart S., Santa María H., Guindos P. (2021)

Seismic behavior of innovative hybrid CLT-steel shear wall for mid-rise buildings

Bulletin of Earthquake Engineering 19 5917–5951

Estrella X., Guindos P., Almazán J.L., Malek S., Santa María H., Montaño J., Berwart S. (2021)

Seismic performance factors for timber buildings with woodframe shear walls

Engineering Structures 248

Guindos P., Auad G., Kolb T. (2021)

Theoretical model for further development of intumescent substances to remediate smoldering in wood fiber insulation panels

Maderas - Ciencia y Tecnología 23 51 1-22

Montaño J., Maury R., Almazán J.L., Estrella X., Guindos P. (2020)

Development of an amplified added stiffening and damping system for wood-frame shear walls

Latin American Journal of Solids and Structures 17 5

Estrella X, Guindos P., Almazán J.L., Malek S. (2020)

Efficient nonlinear modeling of strong wood frame shear walls for mid-rise buildings

Engineering Structures 215 2020

Xavier Estrella, Sardar Malek, José Luis Almazán, Pablo Guindos, Hernán Santa María, Experimental study of the effects of continuous rod hold-down anchorages on the cyclic response of wood frame shear walls, Engineering Structures, Volume 230, 2021, 111641, ISS (2020)

Experimental study of the effects of continuous rod hold-down anchors on the cyclic response of wood frame shear walls

Engineering Structures 230 111641

(2020)

Numerical modelling as a tool to design and analyze large-scale testing: a case study for wood frame shear walls in Chile

8th International Conference on Advances in Experimental Structural EngineeringChristchurch, New Zea

Carrero T., Montaño J., Santa María H., Guindos P. (2020)

Static and dynamic performance of direct hybrid connections of cross-laminated timber with steel, concrete and laminated strand lumber composites

Latín American Journal of Solid and Structures 17 4

Carrero T, Guindos P, Montaño J, Santa María H (2019) Cyclic Behaviour of Hybrid Connections of CLT with LSL, Concrete and Steel. IV Congreso Latinoamericano de Estructuras de Madera CLEM, Montevideo, Uruguay. (2019)

Cyclic Behaviour of Hybrid Connections of CLT with LSL, Concrete and Steel

IV Congreso Latinoamericano de Estructuras de Madera CLEM, Montevideo, Uruguay.

Estrella X, Almazán JL, Santa María H, Guindos P (2019) Factores de diseño sísmica para edificaciones de marco-plataforma (2019)

Factores de diseño sísmico para edificaciones marco-plataforma en Chile

Achisina

Estrella X., Guindos P., Almazán J.L. (2019)

Ground motions for FEMA P-695 application in subduction zones.

Latin American Journal of Solids and Structures 16 9 1-19

Maury R, Guindos P, Almazán JL, Montaño J, Zisis S (2019) Lateral Response of Light Frame Wall with Energy Dissipation Devices and Displacement Amplification. IV Congreso Latinoamericano de Estructuras de Madera CLEM, Montevideo, Uruguay. (2019)

Lateral Response of Light Frame Wall with Energy Dissipation Devices and Displacement Amplification

IV Congreso Latinoamericano de Estructuras de Madera CLEM, Montevideo, Uruguay.

Estrella X, Guindos P, Almazán JL, Malek S (2019) Nonlinear Modelling of Wood Frame Shear Walls for Mid-Height Timber Buildings. IV Congreso Latinoamericano de Estructuras de Madera CLEM, Montevideo, Uruguay. (2019)

Nonlinear Modelling of Wood Frame Shear Walls for Mid-Height Timber Buildings

IV Congreso Latinoamericano de Estructuras de Madera CLEM, Montevideo, Uruguay.

Estrella X, Mlek S, Almazán JL, Guindos P, Santa-María H (2019) Numerical modelling as a tool to design and analyze large-scale testing: a case study for wood frame shear walls in Chile. 8th International conference on advances in experimental structural engineering. Christchurch, New Zealand. (2019)

Numerical modelling as a tool to design and analyze large-scale testing: a case study for wood frame shear walls in Chile

8th International conference on advances in experimental structural engineering. Christchurch, N

Ugalde D., Almazán J. L., Santa María H., Guindos P. (2019)

Seismic protection technologies for timber structures: a review

European Journal of Wood and Wood Products 77 2 173–194

Guindos P., Patel A., Kolb T., Meinlschmidt P., Schlüter F. and Plinke B. (2018)

Experimental and Numerical Characterization of the Influence of a Smoldering Cellulosic Substrate on a Cigarette’s Ignition Propensity Test

Fire Technology 54 3 669-688

Carrero T, Ureta-Céspedes F, Cabrera T, Cárcamo S, Santa María H, Guindos P. (2018). “Global analysis of light-framed timber construction detailing and its performance during major contemporary earthquakes, ” 2018 World Conference on Earthquake Engineering, Seoul, Corea, August 20-23 2018. (2018)

Global analysis of light-framed timber construction detailing and its performance during major contemporary earthquakes

2018 World Conference on Timber Engineering

Ramos, M. D. R., Guindos, P., Piter, J. C. J., & Sosa Zitto, M. A. (2018). Stiffness of connections of fast growing Eucaliptus Grandis with nails of small diameter. (2018)

Stiffness of connections of fast growing eucalyptus grandis with nails of small diameter

2018 World Conference on Timber Engineering

Guindos P., Apurva P., and Rodríguez M-X.. (2018)

Theoretical and Experimental Analysis of the Metal-Based Ignition Propensity Test Thermodynamics

Beiträge zur Tabakforschung International/Contributions to Tobacco Research 28 2 52-64

Guindos, Pablo, Minia-Xisela Rodríguez, and Apurva Patel. "THEORETICAL UNDERSTANDING OF SELF-SUSTANINING SMOLDERING OF WOOD-FIBER PANELS AND ITS EXPERIMENTAL TESTING." (2018)

Theoretical understanding of self-sustanining smoldering of wood-fiber panels and its experimental testing

2018 World Conference on Timber Engineering

(2017)

Characterization and modelling of self-sustanining smoldering of wood industrial products

II Congreso Latinoamericano de Estructuras de Madera - II Congreso Ibero-Latinoamericano de la Mader

(2017)

Estimating the fundamental physical and mechanical properties of softwood with an integral calculation method

II Congreso Latinoamericano de Estructuras de Madera - II Congreso Ibero-Latinoamericano de la Made

(2017)

Glimmbeschleunigung als neuer Materialkennwert.

Holztechnologie 58 4 23-28

(2017)

Improved moment-resisting timber frames for earthquake-prone areas part I: structural connections

II Congreso Latinoamericano de Estructuras de Madera - II Congreso Ibero-Latinoamericano de la Mader

(2017)

Improved moment-resisting timber frames for earthquake-prone areas part ii: shaking table tests

II Congreso Latinoamericano de Estructuras de Madera - II Congreso Ibero-Latinoamericano de la Mader

(2017)

Innovative insight on the mechanical principles of the cell wall based on cryo-electron tomography of the supramolecular 3d nano-architecture of Arabidopsis plant

II Congreso Latinoamericano de Estructuras de Madera - II Congreso Ibero-Latinoamericano de la Made

(2017)

Potencial y Retos de la Construcción con Madera en Chile, una Mirada Hacia el Futuro

XIII Congreso Latinoamericano de Estudiantes de Ingeniería Civil (XIII COLEIC)

(2017)

Sismicidad y Conexiones de Madera: Estado del Arte y Necesidades de Investigación en Chile

II Conferencia Internacional de Estructuras en Madera